重要参数
Tulsimer ®T-46 (阳) Tulsimer ®A-33 (阴)
型式(Type) 强酸性阳离子交换树脂 (Strong acid Cation exchange resin) 强碱性阴离子交换树脂 (Strong base Anion exchange resin)
主体结构(Matrix Structure) 苯乙烯(Cross linked polystyrene) 苯乙烯(Cross linked polystyrene)
功能基 (Functional Group) 硫酸基(Sulfonic acid) 4级胺(Quaternary ammonium Type I)
物理性貭(Physical Form) 球状颗粒(Moist spherical beads) 球状颗粒(Moist spherical beads)
离子型式(Ionic form supplied) 氢(Hydrogen) 氢氧(Hydroxide)
粒径范围(U.S.mesh in wet) 16 to 50 16 to 50
粒度范围 (Particle Size) 0.3 to 1.2 mm 0.3 to 1.2 mm
微粒含量(Fines Content) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh)
总交换容量(Total Exch. Capacity) 1.8 meq/ml minimum of99% in hydrogen form 1.0 meq/ml minimum of 90% in hydroxideform and less than 1% in chloride form
PH范围 (pH Range) 0 to 14 0 to 14
允许温度 (Temp. Stability) 120°C 60°C
微粒含量(Fines Content) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh)
总交换容量(Total Exch. Capacity) 1.8 meq/ml minimum of99% in hydrogen form 1.0 meq/ml minimum of 90% in hydroxideform and less than 1% in chloride form
PH范围 (pH Range) 0 to 14 0 to 14
允许温度 (Temp. Stability) 120°C 60°C
溶解率 (Solubility) Insoluble in all common solvents Insoluble in all common solvents
溶出有机物(Organic leachable) Less than 0.2 mg KMNO4per ml of wet resin Less than 0.2 mg KMNO4 per mlof wet resin
密度Backwash settled density Approx.750 gm/liter Approx.750 gm/liter
不纯物(Impurities) Fe=50 ppm(max) Fe=50 ppm(max)
Cu=50 ppm(max) Cu=50 ppm(max)
Pb=50 ppm(max) Pb=50 ppm(max)
球粒强度(Bead strength) Avg. not less than 300g/bead by Chatillon test (ASTM Standard)
树脂工艺技术咨询：江工18872078361
Tulsimer ®T-46 (阳) Tulsimer ®A-33 (阴)
型式(Type) 强酸性阳离子交换树脂 (Strong acid Cation exchange resin) 强碱性阴离子交换树脂 (Strong base Anion exchange resin)
主体结构(Matrix Structure) 苯乙烯(Cross linked polystyrene) 苯乙烯(Cross linked polystyrene)
功能基 (Functional Group) 硫酸基(Sulfonic acid) 4级胺(Quaternary ammonium Type I)
物理性貭(Physical Form) 球状颗粒(Moist spherical beads) 球状颗粒(Moist spherical beads)
离子型式(Ionic form supplied) 氢(Hydrogen) 氢氧(Hydroxide)
粒径范围(U.S.mesh in wet) 16 to 50 16 to 50
粒度范围 (Particle Size) 0.3 to 1.2 mm 0.3 to 1.2 mm
微粒含量(Fines Content) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh)
总交换容量(Total Exch. Capacity) 1.8 meq/ml minimum of99% in hydrogen form 1.0 meq/ml minimum of 90% in hydroxideform and less than 1% in chloride form
PH范围 (pH Range) 0 to 14 0 to 14
允许温度 (Temp. Stability) 120°C 60°C
微粒含量(Fines Content) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh) 穿过US 50 Mesh小于0.5% (Less than0.5% passing through 50 U.S.mesh)
总交换容量(Total Exch. Capacity) 1.8 meq/ml minimum of99% in hydrogen form 1.0 meq/ml minimum of 90% in hydroxideform and less than 1% in chloride form
PH范围 (pH Range) 0 to 14 0 to 14
允许温度 (Temp. Stability) 120°C 60°C
溶解率 (Solubility) Insoluble in all common solvents Insoluble in all common solvents
溶出有机物(Organic leachable) Less than 0.2 mg KMNO4per ml of wet resin Less than 0.2 mg KMNO4 per mlof wet resin
密度Backwash settled density Approx.750 gm/liter Approx.750 gm/liter
不纯物(Impurities) Fe=50 ppm(max) Fe=50 ppm(max)
Cu=50 ppm(max) Cu=50 ppm(max)
Pb=50 ppm(max) Pb=50 ppm(max)
球粒强度(Bead strength) Avg. not less than 300g/bead by Chatillon test (ASTM Standard)
树脂工艺技术咨询：江工18872078361
